View source for MUCK:Cheatsheet

The [[MUCK]] has plenty of functionality available to you. Here is a list of some of the commands offered as a cheat-sheet. You can find out more about any of them with the <code>help</code> command, and if you do better with a walk-through, the <code>intro</code> command will help you out there.

== Describing yourself ==

* Create a description of yourself using the <code>@desc</code> command. If you want newlines in the description, you can add them with <code>%r</code>. For instance <code>@desc me=Skunk!%r%rSmol!%r%rLittle bundle of excitable, zippy, and fidgety skunk...</code> Others can see this by <code>look</code>ing at you.
* Set your species with <code>@species</code> (Even if you are human.) (''Especially'' if you are human!)
* Set your pronouns with the <code>pronouns</code> command. Others can see these and your species with the <code>lwho</code> command. There are several presets available:
** <code>pronouns epicene</code> — "They / Them"
** <code>pronouns neuter</code> — "It / Its"
** <code>pronouns elverson</code> — "Ey / Em"
** <code>pronouns spivak</code> — "E / Em"
** <code>pronouns vers</code> — "Ve / Ver"
** <code>pronouns intersex</code> — "Shi / Hir"
** <code>pronouns fae</code> — "Fae / Faer"
** <code>pronouns feminine</code> — "She / Her"
** <code>pronouns masculine</code> — "He / Him"

== Substitutions ==
Substitutions are bits that you can put in your text to be substituted when it's sent.

* New line: <code>%r</code>
* Tab: <code>%t</code>
* Colors: colors start with <code>%x</code>, followed by a letter
** <code>%xb</code>: blue text / <code>%xB</code>: blue background
** <code>%xc</code>: cyan text / <code>%xC</code>: cyan background
** <code>%xg</code>: green text / <code>%xG</code>: green background
** <code>%xm</code>: magenta text / <code>%xM</code>: magenta background
** <code>%xr</code>: red text / <code>%xR</code>: red background
** <code>%xw</code>: white text / <code>%xW</code>: white background
** <code>%xx</code>: black text / <code>%xX</code>: black background
** <code>%xy</code>: yellow text / <code>%xY</code>: yellow background
** <code>%xh</code>: bold text
** <code>%xu</code>: underlined text
** Use <code>%xn</code> to reset to normal text
** You can stack these: <code>%xx%xWInverted!%xn</code> produces black text on a white background and then resets

== Moving around ==

* You can check for public sims with <code>sims</code> and then get to them by typing their name (<code>square</code> is a good one to try)
* Most sims should have a <code><u>B</u>ack</code> or <code><u>O</u>ut</code> exit
* You can offer to bring others to you with the call command, or ask to join them with the <code>join</code> command
* You can look at the room with <code>look</code> with no name after it
* You can see who is in the room with <code>lwho</code>

== Communicating ==

* You can speak with the <code>say</code> command, or by starting the line with <code>"</code>
* You can perform an action with the <code>pose</code> command, or by starting the line with <code>:</code> (if you need the text to abut your name, as with 's, use <code>;</code> instead)
* You can speak privately to someone in the same room as you with <code>whisper</code> or <code>wh</code>
* You can speak privately to someone not in the same room as you with <code>page</code> or <code>p</code>
* If you want to describe something to others in the room without your name in front of it, you can use <code>@emit</code> or start the line with <code>\</code>

== Forking and merging ==
Of course forking is implemented!

* Create a new fork with the <code>fork</code> command. If you don't choose a tag (the bit after the #), one will be chosen for you
* To interact with the fork, use the <code>></code> command. You will have to choose the fork to communicate as. For instance:
** Motes creates a fork called Motes#Hi with <code>fork Hi</code>
** She runs up to someone and says hi as the fork with <code>> Hi=:runs up to Bee and says, "Hi!"</code>
** From then on, she doesn't need to use the fork name. <code>> :keeps saying hi for like eight minutes!</code>
** She can create another fork with <code>fork Boo</code> and then interact as before, <code>> Boo=:jumps out from behind the bushes.</code>
** If she wants to switch between forks, she just needs to use the fork's tag as before.
* You can create a memory tied to a fork with <code>memo</code> run as the fork
* A fork can merge down with <code>quit</code> run as the fork

== Creating ==

* Creating objects:
** You can create an object with <code>@create</code>
** You can describe the object with <code>@desc</code>
** If you want to lock it so that only you can move it, use <code>@lock</code>
* Creating rooms:
** Create a new room with <code>@dig/teleport</code>
** Describe it with <code>@desc</code>
** Link it to other rooms with <code>@open</code>
* Find the objects you own with <code>@find</code>, and use <code>@tel</code> to either move yourself to the room or the object to yourself

== Softcode ==

* Softcode lets you make your text dynamic. You can learn more on [https://wiki.tinymux.org/index.php/Softcode_functions the TinyMUX wiki], though be prepared; it's a lot. Mostly, it is contained in square brackets, so keep that in mind
* One thing you might want to do most often is reference pronouns in text such as your descriptions. You can do this with the various function calls related to pronouns, like <code>[they(%#, 1)] [has(%#)] [they(%#)] / [them(%#)] pronouns.</code> which will hopefully produce something like <code>They have she / her pronouns.</code>